Select the "Enable RTP/UDP input" option to automatically use the IP signal as the live feed for the Cinegy playout when the RTP/UDP live item is detected in the playlist.
The following diagram shows the corresponding configuration:
In this configuration, the "Enable RTP/UDP input" option should be selected.
Select the "Listen for SCTE35 cueing stream" option to enable listening for SCTE 35 packets for working with automatic opt-out blocks.
For both options configure the following settings:
- Source url – enter the RTP or UDP URL describing the source channel to be used as the live input.
- Multicast interface – use the drop-down list to define the adapters that will be used to get the stream. Select the "All" option to use all adapters; otherwise choose a local machine's IP address, which may be useful when you need to divide the multicasting subnet from the working subnet.
Out of network offset – set the value in range from -10000 to 10000 milliseconds to define the offset for an automatic opt-out block.
In network offset – set the value in range from -10000 to 10000 milliseconds to define the offset for a live event following an automatic opt-out block.
If you cannot connect remotely to a Cinegy Playout engine when it is running, please make sure that:
the Cinegy Playout application is started using the "Run as Administrator" option from the context menu;
Windows Firewall is not blocking the inbound traffic on the 5321 TCP port for the PlayoutExApp.exe application.
In order to see the live feedback from remote Cinegy Playout in the Cinegy Air or Cinegy Studio control applications, or let Cinegy Playout receive RTP streams, please make sure your Windows Firewall allows incoming UDP connections on all ports.