Cinegy Type supports simultaneous broadcast of CG scenes with several layouts configured separately according to your broadcasting needs. You can add multiple layouts to the current scene from the list of available layouts depending on the original CG scene TV format.

TV System Available TV Formats
NTSC SD, HD, UHD 720x480 29.97 fps 4:3
720x480 29.97 fps 16:9
1920x1080 29.97 fps
1280x720 59.94 fps
3840x2160 29.97 fps
PAL SD, HD, UHD 720x576 25 fps 4:3
720x576 25 fps 16:9
1920x1080 25 fps
1280x720 50 fps
3840x2160 25 fps
To make sure your hardware provides enough performance to drive UHD, please refer to Cinegy Air System Recommendations.

Layouts Managing

To add a new layout, go to the "Layouts" menu and choose the "Add new layout" command:

layout_add_new

A new layout will be added, become active, and ready for further setup.

Refer to the Working with Objects article to learn about Cinegy Type objects and their setup.

To switch between the existing layouts, go to "Layouts" -> "Switch to layout" and choose the desired one from the list.

To delete the current layout, choose the "Delete current layout" command from the "Layouts" menu. The confirmation dialog box appears:

layout_confirm_delete

Press "Yes" to delete the current layout or "No" to cancel the operation.

Please, note: if you add a new layout and then add various objects and effects to it, they will be displayed only on this layout. However, if you add various objects and effects to the current layout and then add a new layout, they will be duplicated on both layouts.
The set of variables is common for all layouts.

When the CG scene with multiple layouts is sent to playout, each layout will be displayed according to its preconfigured TV format.

You may also be interested in: