GPI Control

Reading time ~2 minutes

Cinegy Studio application provides customers with the ability to assign GPI inputs to remotely control Cinegy Studio engine. The control is handled by means of the third-party external devices with GPI interface.

An example of a commonly used GPI input is the vision mixer remote controller. Commands assigned via Cinegy Studio interface GPI are transmitted by vision mixer and received by the Cinegy Studio control application. Along with the common Cinegy Studio interface commands workflow, this scenario implements additional control over the playlist items.

Note
 This feature is only available with a GPI card present on the same machine where the Cinegy Studio control application is running. Refer to the Cinegy Air System Recommendations to get information on the list of supported GPI cards.

The image below displays the board test application responding to command #4:

test_application

The following steps show how to configure Cinegy Studio to execute the assigned GPI commands.

Use the "GPI control settings…​" command from the "Edit" main menu; the following dialog will be launched:

gpi_control_settings

The Cinegy Studio PRO devices can be configured to perform a number of different commands. Select the "Enable GPI" option to assign the desired command execution to the corresponding GPI inputs:

gpi_assigned_commands

On the screenshot above, the "Video 1" device in Cinegy Studio PRO is configured to cue next item if the GPI command on the port #4 is received. Command execution will be triggered by the corresponding GPI port status change.

Having selected the needed commands, press the "OK" button to apply the changes.