Telemetry

Important
The Cinegy Telemetry messaging is supported by the Grafana Labs server. For the detailed information please refer to the Grafana Labs website. You need to be assigned by Cinegy with Organization ID, which is empty by default.

Telemetry server set by default is https://telemetry.cinegy.com.

Telemetry messages are configured per server on the "Telemetry" tab:

Telemetry_tab

There are two types of messages: telemetry messages and notifications.

Tip
By default, both telemetry data and notifications are disabled.

Telemetry Data

Telemetry messages represent regular telemetry notification, including main parameters of the Engine server and Engine itself, such as CPU/GPU load, number of errors, etc. They are regularly sent by Cinegy Capture Agent and include the technical information about all the running Capture Engines on that server.

Notifications

Here you may choose one of the notification levels:

  • Info - notifications of user or automatic actions such as start / stop of capture session, clip splitting, etc.

  • Warnings - notifications of troubles such as timecode break, license loss or unexpected shutdown.

  • Errors - notifications of errors such as recording session failure or signal loss.

Tip
The default notification level is "Info".

apply_button

Press the "Apply" button to save the changes in telemetry settings.

All the changes will be applied only after the Capture Engines restart which requires your confirmation:

Telemetry_no_changes
Caution
Pressing "Yes" will cause Capture Engines restart.

When switching from the "Telemetry" tab to another one without changes applied, the following message appears prompting you to save your changes.

Telemetry_changes_made

Pressing "Yes" will discard your changes and switch to another tab, while pressing "No" allows you to stay on the "Telemetry" tab and apply your changes as it is described above.