This panel represents information about the ingest session available in the Capture Control application and indicates any non-critical failures or critical errors, as well as other statistics.

Engine_monitor_panel

The upper part of this panel displays the status pane containing the following fields:

  • Engine license – the license information. The color indication reflects the current status of the license. If the license is not detected for a certain time period, the corresponding information will be displayed next to the "Engine license" field.

  • Session status – indicates the current job status or the last executed job status.

    If there are non-critical failures detected, the session is not interrupted, but it is indicated with a yellow flashing indicator and upon completion, its status is stated as 'Job completed with warnings'.

    If there was a critical error that led to job failure, the Session status is stated as 'Job failed' and the indicator goes red.

  • Recording time – duration of the current recording session, which appears during recording.

    Session_status

The left panel of the lower part indicates information about missing or failed output, i.e., non-critical failures that did not lead to the whole session failure:

Engine_monitor_left
  • Video format – the TV format of the currently selected engine.

  • Audio channels – the number of audio channels of the currently selected engine.

  • Input frame drops – the number of drops on the input device during the session.

  • Timecode breaks – the number of timecode breaks during the session, which led to the file split.

  • File write errors – number of non-critical output failures during the session.

  • Non-critical failures – errors with the description provide sufficient information about the reasons for the session failure.

The right panel of the lower part indicates some additional information about the ingest session:

Engine_monitor_right
  • Engine status – the current status of the selected engine.

  • Remaining time – available time for recording for the current session. In the case of recording several files to different shares, the minimum value of the remaining time is indicated. In stand-by mode the remaining time displays ––– which means that no data is available. Clicking on the actual time value opens the "Remaining time details" window, providing information on the wrapper, destination, and remaining time.

    Remaining_time_details
  • CPU usage – CPU load expressed as a percentage of the total CPU usage.

  • GPU usage – GPU load expressed as a percentage of the total GPU usage.

  • Encoding buffer usage – usage of encoding buffer defining the number of frames allocated in the memory to handle short system performance downfalls.

  • Write buffer usage – usage of file writer buffer handling short storage performance downfalls as a percentage.

    Important
    The maximum value of these buffers is set in the "Timecode settings" tab in the Capture engine configuration.

If the value of the CPU/GPU/Encoding buffer usage is in the range from 65% up to 90%, the green indicator turns yellow:

Yellow_buffer_load

If the buffer usage exceeds 90%, the indicator goes to red. Session status switches to warnings state, blinking with yellow:

Write_buffer_overload

Hovering the cursor over the Session status will show a pop-up message, explaining the warning(s):

Session_status_details

Clicking on the parameter with errors will show error details, providing information on the wrapper, destination, and retries:

File_write_errors_details

To reset a session warning after the issue has been resolved or handled, use the "Reset" button.