The VU meter appears in many Cinegy modules: viewers, voice-over, etc.
In addition, there are integrated (1000 ms) levels shown with the white bars.
At the top of the scale, there is an additional color indicator. It shows the integrated status of the signal (during approximately the last 1.5 seconds). The following states are indicated (note, the value here is absolute, in dBFS, or dB Full Scale):
Black – digital silence (below -120 dBFS)
Green – signal below -6 dBFS
Red – signal above -6 dBFS
The zero level of the VU meter is adjustable to the requirements of your organization.
At the bottom of the scale, there are two speaker buttons that you can use to mute audio channel(s). To mute an individual left/right audio channel, press the corresponding speaker button or both buttons to mute both audio channels simultaneously.
Adjusting the Zero dB Level
Use the Cinegy Archive Manager utility to set up the zero dB level for the VU meter. The centralized control of this setting provides consistency within the organization.
Open the "Global Settings" dialog and set up the audiometer zero (dB) parameter. This value indicates the distance in dB between the maximum digital level and the zero of the VU meter. In the illustration above, the parameter is set to -14 dB.
|Refer to the Global Settings article within the Cinegy Archive Manager Manual for more details.|
|The typical values for the parameter in broadcasting are -20 dB for NTSC and -18 dB for PAL.|