Step 2: Configuring Cinegy Multiviewer

Reading time ~8 minutes

The Cinegy Multiviewer configuration tool is launched automatically during installation. Alternatively, it can be started manually via the MultiviewerConfigurator.exe file from the installation folder or can be opened from Start > Cinegy > Cinegy Multiviewer > Cinegy Multiviewer Config

General Settings

In this tab you can configure audio settings for the players displayed by Cinegy Multiviewer as well as the font used for displaying the Player Title and set up Remote Control panel.

multiviewer_configurator_general

Input Settings

In this tab select and configure the layout of the channels preview in the main window. There are two layout types in Cinegy Multiviewer:

input_settings_layout_list

Each layout type has a different set of parameters. This document describes the mosaic layout configuration.

Mosaic Layout Settings

Mosaic layout settings should be configured here:

multiviewer_configuration_mosaic_layout

Define the number of columns and rows of the channels preview grid to be displayed.

To manage the list of monitored streams use the corresponding buttons.

add_stream_button

To add a new stream, press the "Add Stream" button.

remove_stream_button

To remove a stream, use the "Remove Stream" button.

up_stream_button down_stream_button

You can sort the stream list using the "Move up" / "Move down" buttons.

Specify the stream title to be displayed on top of the channel preview. Activate the "Enable" toggle switch to include the selected stream in the mosaic layout display. If the "Show title" option is enabled, the specified title is displayed in the player.

In the "Scaling quality" drop-down list choose desired scaling mode applied when processing HD and UHD signals.

In the "Force aspect ratio" drop-down list choose the aspect ratio to be used for display in the player or leave "None" to display the original aspect ratio of the stream. Half-height frame dimensions are used to distribute the CPU and GPU loads between several servers.

Source

The "Source" configuration group contains a number of settings that depend on player mode chosen:

mosaic_layout_source_settings

For demo purposes choose either MPEG-TS or SDI player mode.

For MPEG-TS player mode, configure the following settings:

  • URL – the RTP/UDP/SRT URL for this stream;

  • IP listen – for a simple demo leave this parameter set to 0.0.0.0.

For SDI player mode configure the following settings depending on which device is selected (DeckLink, DVS, AJA or Deltacast):

  • Video format – choose the necessary video format;

  • Board number – define the board number; for the DVS input device also define channel mode, for the Deltacast input device define the channel number;

  • Video input – choose the video input type for the AJA input device. If the Analog video input is selected, it is also necessary to select a format from the "Analog input format" drop-down list;

  • Audio input – define the audio input type (Embedded, AES, Analog or HDMI) for the AJA input device;

  • Reference source – define the reference source for the AJA input device.

Parameters

The "Parameters" configuration group is identical for both player modes; here set up the following parameters:

mosaic_layout_parameters_settings

  • Selection key – a keyboard key to be used to select this stream.

  • Audio meters number – a number of audio meters (up to 8) shown for this channel preview.

  • Player background color – a custom background color for a player.

  • Decode UMD info – to enable the display of special metadata that will be taken from the defined stream, activate this toggle switch. Metadata will be shown at the top of the player window instead of the stream title (this option is not available for SDI and NDI players).

  • Border color – a custom color for player borders. With value set to "0", player borders are invisible.

  • Border thickness – the width of player borders.

Panels

The informational panels display is adjusted here:

player_panels

To enable the display of the monitored stream filling in the whole space within the player window with other panels and indicators being overlaid, activate the "Place inside the frame" toggle switch.

To enable the display of stream encoding and format, as well as video resolution and frame rate, activate the "Show stream info" toggle switch.

To enable the display of the alarm panel in the players, activate the "Show alarm panel" toggle switch.

To enable the display of the panel showing the calculated loudness value and the dialnorm parameter, activate the "Show loudness panel" toggle switch.

To enable the display of the VANC (Vertical Ancillary Data Space) information panel that includes CC, AFD and PR data, activate the "Show VANC panel" toggle switch.

Analyze Group

In the "Analyze group" section select the desired checkbox(es) to analyze video / audio / VANC or all of them.

mosaic_layout_analyze_group

Captioning

In the "Captioning" section select mode with which music cues, environmental sounds, dialogs that occur during the program, will be decoded: None, Closed Captions, DVB or Teletext.

mosaic_layout_closed_captions
Note
 If the stream contains the CC-608 format for the closed captions in the Korean language, select "Коrean" in the "Charset" drop-down list, otherwise leave default "Standard".
Important
 For detailed description of input configuration, please refer to the Input Settings article in the Cinegy Multiviewer Manual.

Output Settings

The four output modes in Cinegy Multiviewer are: Window Output, MPEG-TS Output, Shared RAM Output, and NDI Output. For a simple demo, select Window Output mode, in which a frame is formed from the data of all the incoming RTP streams and is played in the Cinegy Multiviewer window:

output_modes

Define the display on which the Multiviewer window will be opened and specify its size. To expand the Cinegy Multiviewer window to full screen, activate the "Fullscreen/Stretch" toggle switch.

Note
 The F12 key toggles full-screen mode of the Cinegy Multiviewer window.
Important
 For detailed description of all output modes, please refer to the Output Settings article in the Cinegy Multiviewer Manual.

Alarms Settings

The parameters of alerts can be configured in this tab.

alarms_settings

The alarms are displayed below the player screen if the "Show alarm panel" option is enabled in the settings of the corresponding stream. They serve as indicators of various signal problems.

You can select the severity type of the alert or disable it; the threshold time for the alert can be specified in the "Threshold (ms)" field:

alarms_settings_severity_type

The following alerts are available:

  • RTP Alert – alerts for cases when RTP stream is missing;

  • Video Alert – alerts for cases when video stream is missing;

  • Audio Alert – alerts for cases when audio stream is missing;

  • Audio Clipping Alert – alerts for cases when audio volume exceeds the specified level (clipping); the maximum audio level in dB should be specified;

  • Audio Silence Alert – alerts for cases when audio volume is below the specified level (silent); the minimum audio level in dB should be specified;

  • Audio Pure Tone Alert – alerts for cases when the pure audio tone is detected;

  • Video Black Alert – alerts for cases when black frames are detected. You can also define the algorithm and value that will be used to find the difference between the first and the following frames in the sequence;

  • Colorbar Alert – alerts for cases when colorbar displaying is detected;

  • Video Still Alert – alerts for cases when freeze frames are detected. You can also define the algorithm and value that will be used to find the difference between the frames as for the black video alert.

  • VANC Alert – alerts for cases when VANC information loss is detected. Activate "Closed caption" / "Active format description" / "Parental rate" toggle switch(es) to receive alerts when the corresponding information is missing.

    Note
    		 If the VANC" option is not selected within "Analyze Group" in the "Input Settings" tab, VANC alert settings will not be enabled.

  • SDI Alert – alerts for cases of SDI connection loss.

  • Dialnorm Alert – alerts for cases when the dialnorm metadata is out of the specified range in AC-3 streams.

  • License Alert – alerts for cases of license loss.

Important
 For detailed description of all alert settings, please refer to the Alarms Settings article in the Cinegy Multiviewer Manual.

Notify Plugins Settings

Having set up the alerts parameters, go to the "Notify Plugins Settings" tab to configure the alerts receiving options. It is possible to receive alerts in various ways described below.

notify_plugins_settings

Using the "Severity type" drop-down list, you can set the severity type of the notification or disable it. The following notifications are available:

  • File Notification – a report is saved to a text file located in the defined folder;

  • Windows Event Log – an event of the specified type is logged to the Windows Event Log;

  • E-Mail Notification – a message is sent from the configured e-mail account;

  • SNMP Trap – provides a history of SNMP traps, sent to the specified IP host;

  • HTTP Notification – alerts are sent to the specified WEB URL.

  • SMS Notification – alerts are sent to the specified phone number via SMS (a GSM device (mobile phone, SIM stick, etc.) should be connected).

  • Telemetry Notification – notifications are logged into Grafana portal deployed inside the Cinegy Telemetry cluster.

  • Event Manager Notification – alerts are sent to a selected device via Cinegy Event Manager.

Important
 The detailed description of notification parameters can be found in the Notification Settings article in the Cinegy Multiviewer Manual.

Log Settings

In this tab you can define the settings of log files creation: logging level, location for log files, how often new log files should be created.

Having set up the necessary settings, press the "OK" button in the Cinegy Multiviewer Configurator.

Then launch Cinegy Multiviewer, the following window will open:

interface
Caution
 To preview all video streams, a corresponding software or hardware dongle license is required.