Task Submission

Cinegy Convert supports automatic tasks submission, when tasks are taken for processing by the Cinegy Watch Service via previously configured watch folders, as well as manual tasks submission when tasks are individually configured and submitted directly via Cinegy Convert Monitor or Cinegy Convert Client.

Automatic

The Cinegy Convert Watch Service is used to perform repetitive tasks automation. Several watch folders can be configured to monitor Windows OS network shares and Cinegy Archive job drop targets. These watch folders automatically submit transcoding tasks according to the pre-defined settings when new media are detected.

Important
Please refer to the Cinegy Convert Watch Service Manual for details.

Manual

To add a transcoding task manually, press the "Add task" button on the "Queue" tab:

Tasks_pool_new_task

The following "Task designer" window appears:

Task_designer

Define the required Cinegy Convert task properties that are described in detail below.

Task Name

In the "Task name" field, specify the name for a task to be displayed in the Cinegy Convert Monitor interface.

Task Priority

Set the task priority (high, medium, low, or lowest).

Tasks with higher priority will be taken first by Cinegy Convert Agent.

Capability Resources

Press the browse button to open the window for capability resources selection:

select_capability_resources_client
Important
The capability resources should be previously created via Cinegy Process Coordination Explorer. Refer to this article for detailed information about the creation of capability resources.

Here, select the name of the resource that is needed for the conversion job being created and press "OK". It is possible to select multiple capability resources.

Alternatively, you can start typing in the name of the capability resource directly in the "Capability resources" field; while you are typing, the auto-complete feature provides suggestions starting from the letters you have already typed in:

Capability_resources_autofill

Cinegy Convert Agent Manager will take the task with the defined capability resource(s).

Sources

Define the source materials to be converted by clicking the "+" button within the source panel:

Task_designer_source
Tip
You can also use the Ctrl+S keyboard shortcut for this action.

The "Source edit form" dialog appears:

Source_edit_form

A source can be loaded by pressing browse in the "File source" field over the preview monitor.

button_open

Alternatively, press the "Open" button in the controls panel to load a media file.

The loaded source preview is shown on the preview monitor:

Source_edit_form_with_media

Below the monitor, there are controls for setting In and Out points. This enables processing only the defined part of video material.

To define the part of the video for transcoding, go to the desired starting point of the video either by pressing the "Play" button and stopping at the desired position or by entering the desired time value in the "IN" field:

Timecode_enter

button_mark_in

Press the "Set mark In position" button. The appropriate timecode will be shown in the "IN" field.

Then go to the desired end of the video fragment by pressing the "Play" button again and stopping at the desired position or by entering the desired timecode in the "OUT" field.

button_mark_out

Press the "Set mark Out position" button. The appropriate timecode will be shown.

The duration is calculated automatically.

Source_edit_preview

button_remove_mark_in button_remove_mark_out

Use the "Clear mark In position" and/or "Clear mark Out position" buttons to remove In and/or Out points respectively.

Press "OK" to finish defining source media material; the source will be added to the list:

Task_designer_red
Tip
In case of error detection, e.g., unspecified target, a red indicator appears specifying their number. Hovering the mouse pointer over the indicator displays a tooltip describing the problem(s).

Several sources can be glued together during the transcoding task and can be added by clicking the "+" button and adding a source file in the same manner.

multiple_sources

Target Profiles

Set the targets defining the task output by clicking the "+" button within the target panel:

Target_add
Tip
You can also use the Ctrl+T keyboard shortcut for this action.

The "Add transcoding target" dialog appears:

Target_edit_form

Here, from the list, choose the corresponding profile prepared using Cinegy Convert Profile Editor. Its settings will be open on the right-hand panel of the dialog allowing you to make changes in the selected profile, if needed. Then press the "OK" button.

Target_added

Several output targets can be added to the transcoding task defining different output formats like MXF, MP4, SMPTE TT, etc. To do this, invoke the "Target edit form" dialog again and choose another profile.

It is possible to add any source with any target schema. The automatic mapping with resampling and rescaling will be applied to the source media to fit with the defined target schema.

If there are some inconsistencies between source and target media formats, the yellow indication will be displayed. Hovering the mouse pointer over the yellow indicator displays a tooltip with information on what changes will be applied to the source media:

Target_edit_form_scaling

To edit a source/target from the list, use the edit button on the right of the source/target name.

To delete a source/target, use the bucket button.

Note
The validation will be done at the start of the conversion task processing.
Note
If direct transcoding is expected, all sources should have the same compressed stream format.

Queue

The "Queue" tab lists all active transcoding tasks registered in the Process Coordination Service database with their statuses and progress:

Tasks_list

When a task is being processed by Cinegy Convert, its progress bar displays two independent processes:

  • the top bar shows the progress of stages 1 to 7.

  • the bottom bar shows the progress of an individual stage from 0% to 100%.

Task Status

The color of the "Status" column indicator corresponds to the transcoding task state:

status_in_progress

the task is in progress.

status_paused

the task is paused.

status_completed

task processing is completed.

status_suspended

the task is suspended.

When task processing is completed, its status turns green and after several seconds it is removed from the list of active tasks.

Task Priority

Tasks processing is performed in the order of task priorities. The priority of a task is displayed in the dedicated column.

If the task with higher priority is received for processing, all tasks with lower priorities will be automatically paused. When the higher-priority task processing is completed, the lower-priority task processing is automatically resumed.

Caution
Please note, that the license is active and the resources being allocated for the paused task are not released. When the pause request is initiated, only CPU/GPU resources allocated for task processing are released.

Hover the mouse pointer over the status cell of the specified task to see its full status description:

Task_priority
Note
Processing of the manually paused tasks is not automatically resumed. Use the "Resume task" command to proceed with manually paused task processing.

It is possible to change priority for tasks being currently processed by Cinegy Convert Agent Manager by right-clicking the desired task and choosing the required command from the "Priority" menu:

change_priority

The tasks with lower priority will be suspended and higher priority ones will go to the top of the tasks list and continue being processed in the first instance.

Important
Refer to the Watch Folders Tab description in the Cinegy Convert Watch Service Manual for more information on setting priority for automatically created tasks.

Tasks Management

Tasks being processed can be paused/resumed or canceled. To do this, right-click the desired task in the list and choose the corresponding command from the "State" menu:

Task_pause
Note
In the case of cancelling a task of importing to Archive, the part of the media, that has already been imported by that task, will be removed from the Roll.

To resume the paused task processing, use the "Resume task" command.

If a task has not been taken for processing by any Cinegy Convert Agent Manager yet, it can be suspended. To do this, right-click the desired task and use the "Suspend task" command from the "State" menu:

Task_suspend

Select the "Queue task" command from the suspended task right-click menu to bring the task back to the queue.

Manually assigned tasks can be easily duplicated using the "Submit copy" context menu command from the "Maintenance" menu:

Maintenance menu
Note
Due to the specifics of processing tasks automatically created from watch folders, please avoid copying them.
Tip
Creation of a copy is also available for the completed transcoding tasks on the "History" tab.

You can also create a copy of an already completed transcoding task in the "History" tab in a similar way.

The "Reset task" command resets the task status.

Tasks Filtering

Filtering of the task queue is supported, allowing users to hide tasks with specific statuses or narrow down the list by task name. This functionality facilitates easier task management and retrieval.

Tasks can be filtered either by status or by name. Use the filter_iconicon in the table header of the corresponding column to set up the filtering parameters.

The status filter window allows you to select specific statuses to display only the corresponding tasks:

tasks_filtration

Filtering by task name is configured in the following dialog box:

tasks_filtration

clear_filter_button

To remove the name filtering conditions, press the "Clear Filter" button.